Second Life · Tech
Put OpenWrt on your router
OpenWrt is open-source router firmware that keeps getting security updates for thousands of routers, including many their makers have stopped supporting.
What you get, and what you give up
- Gain: current security fixes on hardware the maker no longer updates, and full control over settings.
- Give up: the maker's app, cloud features and usually the warranty. Some hardware features (certain Wi-Fi chips, hardware acceleration) may be missing or slower; the device's page lists what doesn't work.
- You become the maintainer: OpenWrt doesn't update itself the way most router firmware does. You'll need to install new releases yourself, a few times a year.
Is my router supported?
Data: OpenWrt Table of Hardware, licensed CC BY-SA 4.0; 3,124 devices, 2,202 supported, copied Nov 14, 2026. Always confirm on the device's own page before installing.
Steps
- Find the exact model and hardware version on the label underneath the router (for example "Archer C7 v5"). Different hardware versions of the same model often use completely different parts.
- Check the device's page in the Table of Hardware. Read the installation notes and any warnings for your version, and make sure the page lists a current release.
- Save what you need first: note your internet provider's settings (connection type, any VLAN or login), your Wi-Fi names and passwords, and port forwards. Download the stock firmware for your version from the maker in case you want to go back.
- Download the right image from the OpenWrt Firmware Selector. A "factory" image is for installing over the maker's firmware; a "sysupgrade" image is for upgrading an existing OpenWrt install. Using the wrong one is a common way to brick a router.
- Install with a wired connection, following the factory installation guide and your device page. Don't unplug the router while it's writing; it can take several minutes.
- Secure it straight away: log in, set an administrator password and set up Wi-Fi with WPA2 or WPA3 (first login guide). On a fresh install Wi-Fi is usually off and there's no password until you set one.
- Plan updates: watch for new releases and upgrade with the sysupgrade instructions.
If something goes wrong
Many routers have a failsafe or recovery mode that lets you reinstall firmware even after a bad flash. Read the failsafe and factory reset guide and your device page's recovery section before you start, not after.
Last reviewed November 2026. Projects change their instructions; when this page and the official documentation disagree, follow the documentation. All Second Life guides