A water filter’s box can say almost anything. What counts is which contaminants an independent certifier has confirmed it reduces, under which standard. Our water-filter picks are built around that one question.
The standards that matter
Drinking-water filters are certified to standards developed by NSF International and approved as American National Standards (hence “NSF/ANSI”). The Water Quality Association (WQA), one of the certifiers, lists them by title:
- NSF/ANSI 42: Drinking Water Treatment Units, Aesthetic Effects. This covers things like chlorine taste and odor.
- NSF/ANSI 53: Drinking Water Treatment Units, Health Effects. This is the standard for lead and for PFAS such as PFOA and PFOS.
- NSF/ANSI 58: Reverse Osmosis Drinking Water Treatment Systems.
- NSF/ANSI 401: Drinking Water Treatment Units, Emerging Compounds/Incidental Contaminants.
- NSF/ANSI/CAN 372: Drinking Water System Components, Lead Content. This is about the lead content of the filter’s own parts, not what the filter removes.
For lead, the U.S. Environmental Protection Agency (EPA) has a consumer tool, updated June 6, 2024. It points to filters that an accredited third-party certifier has evaluated under NSF/ANSI 53 for lead reduction, to 5 parts per billion or less, and under NSF/ANSI 42 for particulate reduction (Class I).
For PFAS, the EPA says to look for certification to NSF/ANSI 53 or NSF/ANSI 58. It names five ANSI-accredited certifiers that evaluate filters for PFAS reduction: CSA Group, IAPMO R&T, NSF, UL and WQA. The EPA also notes two limits:
- As of April 2024, these certifications focus on two PFAS, PFOA and PFOS.
- The certification standards “do not yet indicate that a filter will remove PFAS down to the levels EPA has now set.”
The rules we apply
- Certified, in the certifier’s own directory. We list a contaminant claim only if we found it in the listing of an accredited certifier such as NSF, WQA or IAPMO, for that model and that cartridge. A claim on the box or the seller’s page isn’t enough. Neither is lab testing “against” a standard: that is not certification.
- Pitchers must be certified for lead. A pitcher has to carry an NSF/ANSI 53 lead-reduction certification in the certifier’s listing. Where only some cartridges for a pitcher are certified for lead, we name the certified one.
- We say what each filter is certified for, and only that. “Why we picked it” lists the certified contaminants and standards. If a maker claims a certification we couldn’t find, we say we don’t count it.
- Regular retail or the maker directly. We don’t list filters sold mainly through network marketing (independent distributors).
- Recalls and enforcement. We check CPSC recalls for every filter and show government actions against the maker.
Filters we turned down
Some of the filters on our public “Didn’t make the cut” list, with the reasons as we published them (shortened):
- Brita Standard Pitcher Filter (OB03). “Brita pitchers with the Standard filter are certified by the Water Quality Association to reduce chlorine taste and odor, zinc, copper, cadmium and mercury, but not lead. We list Brita pitchers only with the Elite filter, which is certified for lead.”
- Waterdrop 10UA Under Sink Water Filter. “Retail listings advertise lead and PFAS reduction, but we found no lead or PFAS certification for it at NSF, and the only certifications we found reported for it are NSF/ANSI 42 (chlorine taste and odor) and NSF/ANSI 372 (lead-free materials, which covers the parts, not what the filter removes). Lab testing ‘against’ NSF/ANSI 53 is not the same as certification.”
- Big Berkey Gravity Water Filter with Black Berkey Elements. “We list only water filters whose contaminant claims are certified to NSF/ANSI standards by an accredited certifier, and NSF’s directory lists Big, Royal and Travel Berkey systems only under NSF/ANSI 42 (chlorine, taste and odor) and only with Phoenix Gravity PGF9-2 elements; we found no listing for Black Berkey elements and no NSF/ANSI 53 health-effects listing when we checked on November 15, 2026. In May 2023 the U.S. EPA ordered Berkey International to stop selling filters containing silver, treating them as unregistered pesticides. Berkey challenged the orders in court; in September 2026 a federal appeals court upheld the denial of its request to block them while the case continues.”
What we can’t check, and you should
- Your water. We don’t know what’s in your tap water. The EPA says a filter may not be useful if PFAS aren’t measured in your water or are below federal limits, and suggests checking with your water provider first.
- The exact model and cartridge. Certifications belong to a specific model and cartridge. A bundle with a different cartridge may not carry the same claims. Check the performance data sheet in the box against the certifier’s listing.
- Changing the cartridge. The EPA says filters “are only effective if they are maintained according to the manufacturer’s instructions.” Note the replacement schedule and its cost before you buy.
- Installation. Under-sink and faucet systems need to fit your plumbing. Check the fittings and space.
Questions people ask
Does “tested to NSF/ANSI 53” mean certified? No. Certification means an accredited certifier has evaluated the product and lists it in its directory. The EPA suggests checking the certifier’s directory if you’re unsure.
Does NSF/ANSI 372 mean the filter removes lead? No. Standard 372 is about the lead content of the product’s own parts. Lead reduction is covered by NSF/ANSI 53.
Will a certified filter remove all PFAS? The EPA said in April 2024 that filter certifications focus on PFOA and PFOS, and that they don’t yet show a filter removes PFAS down to EPA’s drinking-water levels. Some filters now also carry a “Total PFAS” claim under NSF/ANSI 53, which covers more PFAS; check which ones the listing names.
Is there a federal requirement for home filters? We found no such requirement in the EPA material we read. That is one reason we list only claims we found in a certifier’s directory.